PHOENIX
Retrofit fireplace for T2000 series
PHOENIX1
Update available soon (compliant with EN16510 regulations). The Phoenix insert is ideal to give your old open fireplace a contemporary look. It is easy to install and proves to be ecological and efficient, with double the heat production for half the wood consumption, when compared to old fireplaces. The Phoenix offers you an extensive view on the flames and of course it can be installed in any new interior as well.
Specifications
SPECIFICATIONS
| Product name | |
|---|---|
| Family | |
| color | Black |
| Type | |
| Type fireplace | |
| Style | |
| Dimensions WxHxD (mm) | |
| Weight (kg) | |
| Fuel | |
| Connection diameter (mm) | |
| Connection place | |
| Nominal performance (kW) | |
| Minimum performance (kW) | |
| Capacity (m³) | |
| Maximum performance (kW) | |
| Efficiency | |
| Dust particles (mg/Nm³) | |
| CO emissions (13% O2) | |
| Combustion floor | |
| Minimum pression | |
| Flue gas volume (g/s) | |
| Log length (cm) | |
| Second combustion | |
| Distance to combustible materials – Front (mm) | 800 |
| Ventilator | |
| Thermostat | |
| merhfachbelegung | |
| stufe2blimsch | |
| HKI | |
| Temperature increase measured in the measurement section (K) | |
| Nox emissions (13%O2 at nominal heat output - mg/Nm³) | 91,00 |
| Seasonal space heating energy efficiency (%) | 70,00 |
| Direct heat output (kW) | |
| Indirect heat output (kW) | |
| Type of heat output/room temperature control | single stage heat output, no room temperature control |
* The distance with heat shield may only be applied when a ventilated or insulated chimney is present.
** For this appliance, two test reports exist with different fuel loads. Each report results in its own nominal output, capacity, and other technical data (not displayed).
Ask for a catalogue
HOW TO'S
No Post Found
Augmented reality
Scan this code with your smartphone or tablet to view the product in your interior












